Multiplex Easy Star 1 Adjustable Motor Mount Outrunner

Multiplex Easy Star 1 Adjustable Motor Mount Outrunner
Part # EBS Outrunner
Availability: Out Of Stock
Price: $17.95
   - OR -   
1 reviews  1 reviews  |  Please Login To Review This Product

Multiplex Easy Star 1 Adjustable Motor Mount Outrunner Multiplex Easy Star 1 Adjustable Motor Mount Outrunner Multiplex Easy Star 1 Adjustable Motor Mount Outrunner Multiplex Easy Star 1 Adjustable Motor Mount Outrunner Multiplex Easy Star 1 Adjustable Motor Mount Outrunner Multiplex Easy Star 1 Adjustable Motor Mount Outrunner Multiplex Easy Star 1 Adjustable Motor Mount Outrunner Multiplex Easy Star 1 Adjustable Motor Mount Outrunner Multiplex Easy Star 1 Adjustable Motor Mount Outrunner

 


This CNC machined aluminum two piece mount is designed to adapt a large range of outrunner motors to the Multiplex Easy Star. It will allow for three different motor mounting heights to accommodate propeller sizes ranging from 6" to 8".

With this feature you can easily run a lower KV motor with a larger propeller for more thrust and better efficiency. This would be a perfect combination for FPV pilots looking for longer flight times and a more quiet platform.

Swapping motors from a 35mm outrunner with an 8" prop to a 28mm outrunner with a 6" prop can easily be done by removing a few screws. This is ideal for those looking to achieve the best performance possible.

Position 1: stock height up to a 6" prop.
Position 2: (+) 0.41" for up to a 7" prop.
Position 3: (+) 1.0" for up to an 8" prop.

Three step installation:

  1. Glue motor base tube into the fuselage (nacelle) making sure mounting flange is square.
  2. Attach new motor to motor plate with supplied flat head screws.
  3. Attach motor plate to motor tube at desired height with suppled pan head screws.

Included: 1 - EBS Base Outrunner Tube and EBS Motor Plate, 4 motor screws and 4 mount screws.

Total Weight: 20g

*** This is for the original Multipex Easy Star.  ***
*** An adjustable motor mount for the new Multiplex Easy Star 2 is available here. ***

Notes:

A 35mm outrunner motor will only fit in Position 3 (+ 1.0"). 28mm outrunners will work in any of the three positions. The stock thrust angles are retained in all 3 positions. If a change in thrust angle is desired, simply add a small washer between the motor base and motor plate at the appropriate locations.

Dimensions: I.D. = 1.01" / O.D. = 1.11" / Length: 1.375"

Center of Gravity should always be checked and adjusted per the user manual after installation of a new motor.

 


Compatible Motors

  • 28mm Outrunners
  • 35mm Outrunners

Due to the large variety of compatible motors Please verify motor size and KV will suite flying style

Acceptable bolt patterns (units in mm):

  • 16x16
  • 16x19
  • 19x19
  • 19x25
  • 25x25

Please contact us with any questions on motor compatibility

Write a review

Please Login To Review This Product
Powered By OpenCart
Small Parts CNC © 2024