Parkzone Stinson 3536
Availability: Out Of Stock
 |
 |
 |
 |
 |
 |
The Parkzone Stinson 3536 series motor mount is CNC machined from billet aluminum. A key feature to this mount is that it utilizes the stock plastic mount as a buffer zone in the event of a crash. The very inexpensive and easily replaceable stock plastic mount should take the impact instead of damaging the planes fuselage. Simply bolt on and you are ready to fly.
Three step installation:
- Attach new motor to aluminum mount with the motors supplied screws
- Attach Parkzone stock plastic mount using the original motor screws
- Attach entire assembly to the planes fuselage with the original mounting screws
Included: 1 - Parkzone Stinson 3536 Aluminum Motor Mount with Propeller Spacer
Weight: 4.5g
Notes:
On the 3536 motors that utilize the bolt on propeller shaft you will need to have the cowl opening slightly enlarged to clear the bolt on propeller shaft base. For proper cowl to propeller clearance you will use the supplied prop spacer plus the flat washer that comes with the new motor as shown in the pictures.
The 3536 series motors will work with no cowl modifications if the shaft is pressed forward and a standard propeller collet is used. The stock collet adapter and nut will work great with motors utilizing a 4mm shaft.
Compatible Motors
There is a large selection of motors to choose from. Here are a few options.
- Heads Up RC 3536-10
- Turnigy 35-36C 1100KV (and other KV options)
- RC Timer BC3536-6 1250KV
- Others in the 3536 series with bolt patterns shown below
Acceptable bolt patterns (units in mm):
- 19x19
- 19x25
Please contact us with any questions on motor compatibility.