Flyzone Cessna 182 Skylane Aluminum Motor Mount
Availability: Out Of Stock
The Flyzone Select Scale Cessna 182 Skylane aluminum mount is CNC machined from billet aluminum. The recommended 450 sized motors are significantly larger than the stock motor and will give this Flyzone Cessna 182 Skylane the extra power it was lacking from the factory but still retain it's easy flying characteristics. Proper thrust angles are machined into the mount for quick installation.
Two step installation:
- Attach new motor to aluminum mount with the motors supplied screws
- Attach entire assembly to the planes metal firewall bracket with the 3 supplied screws.
Included: 1 - Flyzone Select Scale Cessna 182 Skylane Aluminum Motor Mount and 3 screws
Weight: 3g
Notes:
For proper motor clearance inside the cowl, a very small amount of foam will need to be removed from the inside of the cowl. This is shown in one of the photos.
The center of gravity should always be checked per the manual after any modifications are done to your plane.
Compatible Motors
-
Heads Up RC Power Up 450 Sport (up to 32oz of thrust at 15 amps with recommended props)
- The higher KV Power Up 450 motors can be used with an upgraded larger ESC
- E-Flite Park 450
- Turnigy Park 450
Acceptable bolt patterns (units in mm):
- 16x19
Compatible Props:
- GWS EP9050
- APC 9 x 4.5E
- There are quite a few other options based on the type of flying characteristic you are after.
If using larger props please verify that you do not exceed the 18A limit of the stock ESC. A larger ESC may be required if larger props or higher KV motors are used.
Please contact us with any questions on motor compatibility.